Brand
Ruud
Series
RH1T Series
Connection Type
NPT Female
Material
Steel
Finish
Pre-Painted
Dimensions
42.5 in H x 17.5 in W x 21.69 in D
Connection Size
3/4in
Frequency Rating
60
Phase
3
Number of Stages
1
Refrigerant Type
R-410A
SEER Rating
16
BTU Rating
30000
Wattage
373
CFM Rating
600 to 1200
Filter Size
16 x 20
Fuse Rating
15
Cooling Capacity
30000
Rotational Speed
300 to 1100
Liquid Line Size
3/8
Suction Line Size
3/4
Motor Type
Constant Torque
Number of Speeds
5
Voltage Rating
480V
Amperage Rating
2.1A
HP Rating
1/2
Configuration
Downflow, Horizontal Left, Horizontal Right, Upflow
Nominal Capacity
3ton
Long Description
RUUD® Air Handler, Series: RH1T Series, 3 ton Nominal Capacity, 30000 Btu/hr Cooling, 30000 Btu/hr, 480 V, 2.1 A, 373 W, 1/2 hp Rating, 60 Hz, 3 ph, 300 to 1100 rpm Rotational Speed, 600 to 1200 cfm Rating, Downflow, Horizontal Left, Horizontal Right, Upflow Configuration, 16 SEER, NPT Female Connection Type, R-410A, 15 A Fuse, 3/4 in Connection, 3/8 in Liquid Line, 3/4 in Suction Line, 16 x 20 in Filter, 1 Stage, 5 Speed, Constant Torque Motor, Steel, Pre-Painted, 42.5 in H x 17.5 in W x 21.69 in D, Additional Information: Standard Coil Efficiency, TEV Metering Device, Non-Communication Controls
- Versatile 4-way convertible design for up flow, down flow, horizontal left and horizontal right applications
- Factory installed indoor coil
- Sturdy cabinet construction with 1 in of foil faced insulation for excellent sound and insulating characteristics
- Field installed auxiliary electric heater kits provide exact heat for indoor comfort, kits include circuit breakers which meet UL and cUL requirements for service disconnect
- All Models meet or exceed 330 to 400 cfm per ton at 0.3 in of external static pressure
- Enhanced airflow up to 0.7 in external static pressure
- Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing
- Cabinet air leakage less than 2% at 1 in H2O when tested in accordance with ASHRAE Standard 193
- Attractive pre-painted cabinet exterior
- Rugged wall steel cabinet construction, designed for added strength and versatility
- Traditional open wire element design for heat applications
- Three combustible floor base accessories fit all Model sizes when required for down flow installations on combustible floors
- Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing
- Coils have copper sweat refrigerant connections
- Molded polymer corrosion-resistant condensate drain pan is provided on all indoor coils
- Provisions for field electrical, connections available from either side or top of the air handler cabinet
- Blower housing with controls, motor and blower, slide out design for service and maintenance convenience
- Expansion valve on indoor coil provides for operation with air conditioning
- Indoor coil design provides low air side pressure drop, high performance and extremely compact size
- Supply duct flanges provided as standard on air handler cabinet