Brand
Samsung
Connection Type
1/4 in Flared High Side, 5/8 in Flared Low Side, 11/16 in OD Condensate
Temperature Rating
61 to 90 deg F Cooling, <=81 deg F Heating
Frequency Rating
60
Phase
1
Sound Level
30 dB, 45 dB
Power Rating
27 W, 125 W
EER Rating
10.5
SEER Rating
18
BTU Rating
22000 Btu/hr, 24000 Btu/hr
CFM Rating
459 cfm, 533 cfm, 607 cfm, 657 cfm
Fuse Rating
30
HSPF Rating
9
Number of Fan Speeds
3
Voltage Rating
208 to 230V
Amperage Rating
10.5A
Mounting Type
Wall
Long Description
Samsung WindFree™ 2.0e Evaporator Indoor Split System, 208 to 230 V, 10.5 A, 27 W, 125 W, 60 Hz, 1 ph, 3 Number of Fan Speeds, 22000 Btu/hr, 24000 Btu/hr, 459 cfm, 533 cfm, 607 cfm, 657 cfm Rating, 10.5 EER, 18 SEER, HSPF: 9, 1/4 in Flared High Side, 5/8 in Flared Low Side, 11/16 in OD Condensate Connection Type, 30 A Fuse, 30 dB, 45 dB, Wall Mount, 61 to 90 deg F Cooling, <=81 deg F Heating, 41-1/2 in Overall Width, 11-3/4 in Overall Height, Additional Information: 8-7/16 in D Dimensions, R-410A Refrigerant
- The indoor unit shall feature WindFree™ mode
- In cooling mode, as room temperature nears set temperature, the unit will close its louver and will disperse air into the space through thousands of micro holes on the front of the indoor unit preventing cold air drafts on occupants
- The indoor unit shall have Wi-Fi capability as standard
- The indoor unit shall have easy access to wire, pipe and drain connections via access panel on the bottom of the unit for simple installation and service
- The heat exchangers shall be mechanically bonded fin to copper tube
- The compressor shall be hermetically sealed, inverter controlled, BLDC rotary
- Refrigerant flow shall be controlled by an electronic expansion valve at the outdoor unit
- The indoor fan shall be a single, anti-bacterial cross-flow type
- Three-fan speed settings and auto setting
- Automatic (motorized) vertical swing (up/down) and horizontal swing (left/right) louvers
- The system shall have a built-in Wi-Fi adapter as standard to allow control and monitoring using the Samsung SmartThings app (Android, iOS)
- Dual set temperature support when connected to MWR-WG00UN advanced wired controller and supported central control
- The indoor unit shall have a simple connection for overflow detection devices or any other normally closed contact for simple unit shutdown
- The indoor unit shall ship with a wireless controller, holder and batteries
- Samsung central control compatible (MIM-R10UN accessory required)
- Interconnect control wire between outdoor and indoor unit shall be two 16 AWG
- System energy consumption can be viewed using the Samsung SmartThings mobile app or on the indoor unit display using the included wireless controller
- AI (artificial intelligence) auto mode technology monitors factors such as indoor temperature, outdoor temperature, set temperature and operating time to learn the patterns within your home to automatically adjust system operation to maximize occupant comfort and efficiency (Wi-Fi connection required)
- Eco mode to reduce energy consumption during low demand operation
- Smart install mode - startup system diagnostics operation to ensure system readiness during initial operation