Brand
Samsung
Series
DVM S Series
Connection Type
Flared
Material
Steel
Finish
Galvanized
Frequency Rating
60
Phase
1
Sound Level
42 dBA, 38 dBA, 34 dBA
Power Rating
220
Refrigerant Type
R-410A
BTU Rating
48000 Btu/hr Cooling, 54000 Btu/hr Heating
CFM Rating
1519
Tonnage
4
Number of Fan Speeds
3
Voltage Rating
208 - 230V
Amperage Rating
1.5A
Suitable For Use With
Samsung DVM S Water and DVM Eco Systems
Long Description
Samsung HSP Ducted Unit, Series: DVM S Series, 208 - 230 V, 1.5 A, 220 W, 60 Hz, 1 ph Phase, 3 Fan Speeds, 48000 Btu/hr Cooling, 54000 Btu/hr Heating, 1519 cfm, Flared Connection, R-410A Refrigerant, Tonnage: 4 ton, 42 dBA, 38 dBA, 34 dBA Sound Level, Steel, Finish: Galvanized, 27-9/16 in Overall Length, 51-3/16 in Overall Width, 11-13/16 in Overall Height, For Use With: Samsung DVM S Water and DVM Eco Systems, Additional Information: 2021 Version, Indoor Unit, Deluxe Feature, Heat Pump and Heat Recovery Mode
- Horizontal discharge airflow
- The indoor unit shall have a removable EEPROM that stores system programming information, unit name, and other data
- All indoor unit addressing and option settings shall be done digitally; the indoor unit does not contain rotary dials or setting switches
- The indoor unit shall have static pressure scanning for simple setup and optimized comfort settings for the occupant
- The indoor unit shall have smart-tuning function that can provide optimized comfort by allowing the occupant to offset the fan CFM curve with a wired remote controller (MWR-SH10N, MWR-SH11UN, MWR-WE13*N, MWR-WG00*N) to increase or decrease airflow
- The indoor unit shall allow service access from four sides (top, bottom, left, right)
- The indoor unit shall have an internal condensate pump as standard with float switch (maximum 29" lift from bottom of unit)
- High-voltage terminal block temperature sensor to disable unit in the event overheating of power connection
- Discharge air temperature sensor with target discharge temperature control capability
- The heat exchanger shall be mechanically bonded fin to copper tube
- Indoor fan is a centrifugal type with a single fan motor
- Fan output can be configured during commissioning for various external static pressure ranges