Brand
Samsung
Connection Type
Flared
Material
Polypropylene/Steel
Temperature Rating
61 to 90 deg F Cooling, 50 to 86 deg F Heating
Frequency Rating
60
Phase
1
Sound Level
41 dBA, 27 dBA
Power Rating
40 W Condenser, 27 W Evaporator
Drive Type
Inverter
EER Rating
11
SEER Rating
18.7
BTU Rating
18000 Btu/hr Cooling, 21000 Btu/hr Heating
CFM Rating
1766 cfm Condenser, 438 to 586 cfm Evaporator
Fuse Rating
25
HSPF Rating
8
Number of Fan Speeds
3
Voltage Rating
208 - 230V
Amperage Rating
2/7.4/9.2 A Cooling, 2.2/8.2/10.1 A Heating
Mounting Type
Wall
Model
AR18CSKCPWKNCV
Long Description
Samsung WindFree™ 3.0i Single-Zone Split System Indoor Unit, Model: AR18CSKCPWKNCV, 208 - 230 V, 2/7.4/9.2 A Cooling, 2.2/8.2/10.1 A Heating, 40 W Condenser, 27 W Evaporator, 60 Hz, 1 ph Phase, 3 Fan Speeds, 18000 Btu/hr Cooling, 21000 Btu/hr Heating, 1766 cfm Condenser, 438 to 586 cfm Evaporator, 11 EER Rating, 18.7 SEER, 8 HSPF, Flared Connection, 25 A Fuse Rating, Inverter Drive, 41 dBA, 27 dBA Sound Level, Wall Mounting, Polypropylene/Steel, 61 to 90 deg F Cooling, 50 to 86 deg F Heating, 8-7/16 in Overall Length, 41-9/16 in Overall Width, 13-9/16 in Overall Height, Additional Information: RAC Classification, 2023 Version, Inverter R-410A HP Type, WindFree Airise Design, PM1.0 Filter, PM1.0 Sensor, Wi-Fi Feature
- The indoor unit shall feature WindFree™* mode. In cooling mode, as room temperature nears set temperature, the unit will close its louver and will disperse air into the space through thousands of micro-holes on the front of the indoor unit preventing cold air drafts on occupants
- The indoor unit shall be capable of sensing dust particulate matter in the air stream, and displaying the appropriate measured data on the unit's display
- The indoor unit shall have Wi-Fi capability as standard
- Outdoor unit shall provide 208/230V power to indoor unit via 14 AWG X 3 interconnect power cable
- Indoor unit chassis shall be UL94 V0 with a galvanized steel mounting bracket
- The indoor unit shall have easy-access to wire, pipe, and drain connections via access panel on the bottom of the unit for simple installation and service
- The outdoor unit shall be galvanized steel with a baked on powder coated finish for durability
- The heat exchangers shall be mechanically bonded fin to copper tube
- The compressor shall be hermetically sealed, inverter controlled, BLDC Rotary
- Refrigerant flow shall be controlled by an electronic expansion valve at the outdoor unit
- The indoor fan shall be a single, antibacterial cross-flow type
- Automatic (motorized) vertical swing (up/down) and horizontal swing (left/right) louvers
- The system shall have a built in Wi-Fi adapter as standard to allow control and monitoring using the Samsung SmartThings app (Android, iOS)
- Dual set temperature support when connected to MWR-WG00UN Advanced Wired Controller
- The indoor unit shall have a simple connection for overflow detection devices or any other normally closed contact for simple unit shutdown
- The indoor unit shall ship with a wireless controller, holder, and batteries
- Interconnect control wire between outdoor and indoor unit shall be 16AWG X 2